May 27th, 2012 
Matt Moving on to the rear arms, align the arms in the blocks, and slide in the hinge pins
Followed by the blue hinge pin plate
There is some modification required for the rear bumper. In order to hold that rear hinge pin plate on, we need to drill 4mm in the bumper and plate, and tap the rear hole on the gearbox.
This will allow us to put a 4mm screw through the bumper and plate and thread it into the gearcase.
All that’s left to hold the rear bumper on is two screws through the bottom into the gearcase
And two screws through the top
Posted in 
Tags: 
[…] and the shootout in a few weeks when it is complete, so stay tuned. Up first is the SSC build. Enjoy. __________________ http://www.rcsoup.com- R/C Reviews, News, and Tips <<- PM Me if you'd like […]
[…] mentioned, we’ll be having a 3 way shootout between LCG chassis conversions soon. It will be Shining Star Chassis (SSC) vs. Team RC Engineering (RCE) vs. Chuckworks […]
[…] LCG Comparison – very cool read!!! "We're doing an LCG shootout over at RCSoup.com. We are pinning the Team RCE against the SSC against the Chuckworks RC. We'll be posting the builds first, and the shootout in a few weeks when it is complete, so stay tuned. Up first is the SSC build. Enjoy." […]
[…] […]