MIP would like to introduce the drive system of the future, for all Mod 2wd vehicles; MOD MIP ‘SHINY’ PUCKS™ SYSTEMS!!!!

These systems are of steel construction, keeping to relatively the same overall weight that you are used to with your steel OEM bones; but giving you the added benefit of MIP Pucks™ that are fully serviceable. No longer will diff outdrives and CV bones wear simultaneously, with the puck system all that is needed is to easily change Pucks™ when necessary, and the drivetrain stays tighter, fresh, longer. This added benefit equates to less money, less time off the track for rebuilds, and keeps your vehicle more competitive. 

TARGET CUSTOMERS:

• Serious racers looking for a competitive advantage on the track
• Racers with 13.5 or higher motors

COMPETITIVE ADVANTAGES:

• Quicker acceleration
• Less overall wear on drive components

FEATURES:

• Replaceable Pucks to keep drivetrain fresh
• Race Prove C-CVD™ Construction
• Two sets of holes in the C-CVD™ bell
• 100% Quality made in the USA!

INCLUDES:

• MIP Confetti Sticker (2)
• MIP Thread Gel Safety Sheet (1)
• MIP Instruction sheet (1)
• 5/64” Chrome Steel Ball Bearings (6)
• #2 Hardened Washer (2)
• Diff Lube & Grease Cup (1)
• ¼ x 9/32” Diff Spring (1)
• 2-56 x .925 Shoulder  Diff  Screw (1)
• Molded T-nut (1)
• Diff Thrust Cover (1)
• MIP Pucks™ Shiny Outdrive Male Serpent (1)
• MIP Pucks™ Shiny Outdrive Female Serpent (1)
• BHCS 1-72 x 1/8 Button Head (6)
• MIP Lube & Thread Gel Cup (1)
• MIP CVD™ Puck Pin (2)
• MIP Outdrive Puck (8)
• MIP Pucks™ Shiny CVA Bone Serpent Spyder SRX-2 (2)

REQUIRES:

• .050 inch Allen Key – (Suggest #9000 MIP Hex Driver Wrench .050 inch)
• 5/64 inch Allen Key – (Suggest #9002 MIP Hex Driver Wrench 5/64 inch)

COMPATIBILITY:

• Serpent Spyder SRX-2 (SER500001/SER500003)

SUPPORT PRODUCTS:

#9150  HW-BEARING/ 5/64in Chrome Steel Ball (6) MSRP: $1.50 
#9151 MIP Ball Diff Thrust Washers, 1/4in x 3/32in Associated SC10, T4, B4 (2) MSRP: $2.00
#13131 MIP Pucks™, Orange No.1 Pucks (8) MSRP: $6.00
#13132 MIP Pucks™, No.1 Pins & Screws (2) MSRP: $8.00
#14126 MIP Pucks™, Shiny CVA Bone, Serpent Spyder SRX-2 (2) MSRP: $30.00 
#14127 MIP Pucks™, Male Outdrive, Serpent Spyder MSRP: $15.00
#14128 MIP Pucks™, Female Outdrive, Serpent Spyder MSRP: $15.00
#14129 MIP Pucks™, Thrust Rebuild Kit, Serpent Spyder MSRP: $10.00
#99026 HW-SHCS, 2-56 x .92 Diff Screw (2) MSRP: $3.00
#99035 HW-Spring, .113 x .197 x .040, Assoc Super Diff (1) MSRP: $2.50
#99061 HW-Bearing, 5 x 8 x 2.5mm (2) MSRP: $5.00
#99064 HW-BHCS, 1-72 x 1/8 (6) MSRP: $3.50