Ask any 1/5 scale owner if they have had their header pipe come off during a run, and without a doubt we know the answer will be YES! This doesn’t happen due to lack of maintenance but rather a poor design as the bolts vibrate loose even with the application of red thread loc. As we are all aware thread loc loses its effectiveness when heat is applied, and what does an engine produce? That’s right, HEAT! Actually a constant 240°F (116°C)!  This header pipe failure happened to the MIP team just one time, and we were not so impressed, so we re-engineered the bolt system that holds on the header pipe. With this oldie but goodie design you can rest assured that you will never hear the distinctive BAAAAAAHHHHHH sound that signifies your header pipe just came off. With the use of this product it is quite impossible for the bolts to loosen up as the other bolt will be pulled on by the wire subsequently tightening itself up. Welcome to next level, MIP’s Level. 100% Made and Designed in the USA.

TARGET CUSTOMERS:
1/5 Scale Customers that have header pipes

COMPETITIVE ADVANTAGES:
Full power throughout the Race
No more worries

FEATURES:
100% Made in the USA

INCLUDES:
MIP Confetti Sticker (2), MIP Instructions Sheet (1), SHSS M5 x 25mm Cup Point Set Screw (2), M5 x 9mm Lock Washer (2), MIP Wired Header Nut (2), MIP Header Wire 2 Feet (1)

REQUIRES:
2.5mm Allen Key- (Suggest #9009 MIP Hex Driver Wrench 2.5mm)
10mm Open-End Wrench
Wire Cutters

COMPATIBILITY:
1/5 5ive-T 4WD Off-Road Truck (#LOSB0019)

SUPPORT PRODUCTS:
#99080 HW-SHSS, M5 x 25mm Cup Point (2) MSRP: $3.00
#99081 HW-Washer, M5 x 8mm Split Lock Washer (4) MSRP: $3.00
#99082 HW-Wire, .025 Spring Wire, 2 Feet (1) MSRP: $4.00
#99083 HW-Nut, M5 Safety Wire Nut, 10mm Hex (2) MSRP: $10.00

#14350 MIP Header Lock Wire Kit, Losi 5ive-T
MSRP: $15.00
UPC: 691545143507