MIP X-Duty Rear C-Drive Kit, Axial Yeti

What do you get when an off-road race car meets a rock crawler? Well the dynamo combo gives you a Rock Racer! Axial has dived in head first and given both bashers and racers a car that they can get excited about, the Yeti! Since the Yeti comes with a stock plastic rear driveshaft, we knew you would want better, and the Yeti X-duty Drive was born. With a few adjustments to our proven drive hubs we were able to fit in a rock crawling and basher approved X-duty Design axle to accommodate all the power and thrashing you may put it through. Buy Once, Buy MIP! Made 100% in the USA!

mip yeti

Axial Yeti Rock Racer

Proven X-duty Design

Made from High Grade Alloy Steel
Heated Treated
Spline Drive Technology
All Metal Design
100% Made in the USA

MIP Confetti Sticker (2), MIP Thread Gel Safety Sheet (1), SHSS 8-32 x 1/8” Flat Point (2), MIP M3 x 12mm (2), 3/32 x 5/8” Cross Pin (2), ¼” x 3/8” Coupling (2), MIP Inst. Sheet X-Duty (1),  MIP Lube & Thread Gel Cup (1), MIP Male Bone Spline CVD™ (1), MIP Female Bone CVD™ (1), MIP 5mm Drive Hub Axial Yeti (2)

1.5mm Allen Key- (Suggest #9007 MIP Hex Driver Wrench 1.5mm)
2.0mm Allen Key – (Suggest #9008 MIP Hex Driver Wrench 2.0mm)

Axial Yeti Rock Racer (#AX90026)

#01147 MIP CVD™ Rebuild Kit, Race Duty and 1-8th MT MSRP: $12.95
#05201 MIP Blue Thread Gel & Grease Cup MSRP: $3.00
#05202 MIP Blue Thread Gel Cup MSRP: $3.00
#05203 MIP Grease Cup MSRP:  $3.00
#09169 MIP Spline CVD™ Bone, Traxxas Summit (1) MSRP: $15.00
#10135 MIP X-Duty CVD™ Bone Female, Traxxas Slash 4×4, Rally (1) MSRP: $15.00
#10142 HW-PIN/ Ø3/32 x 5/8in Replacement Cross Pins (4) for 1/8, X-Duty, Monster Truck Kits MSRP: $10.00
#14391 MIP X-Duty Drive Hub, 5mm, Axial Yeti (2) MSRP: $22.00
#99023 HW-Pin, 3/32 x 5/8 Solid Pin (4) MSRP: $7.00
#99031 HW-SHSS, 8-32 x 1/8 Flat Point (8) MSRP: $3.50
#99062 HW-SHSS, M3 x 12mm Pin Screw (6) MSRP: $5.00

Both comments and pings are currently closed.

Comments are closed.

Powered by WordPress