Aerodynamic rear wing molded from flexible composite material. Reinforced edges in critical areas to prevent breakage. Increases side stability and downforce. Includes two wing shims. Aerodynamic rear wing Flexible composite material Reinforced edges in critical areas to prevent breakage Increased side stability Increased downforce 353511 XB9 Composite Rear Wing – White 353511-K XB9 Composite Rear […]
Solid Performance : ICharger 308 Duo Review
The iCharger, One of the most used chargers in today’s racing world. This charger has caused a lot of controversy in the Stock world as the high amp charging and high amp discharging has sparked a lot of issues in the racing community. The iCharger 308, 3010, and 4010 duo’s all run the same software, and […]
Tamiya M-05v2 Pro Mini JCW Coupe Build Up
Tamiya Mini (or M-Chassis) cars are something I have always admired through my years in the hobby. I’ve even owned a couple M-03’s but never really got into their full potential. That’s to say I’ve never raced one. The class has always appealed to me because the cars are smaller, typically more detailed, and unique […]
Team C TM2SC 2WD Mid Motor Short Course Hands On
In today’s race world the race participants dictate the quality of the race surface. The trend has moved to the farthest extreme of asphalt racing in off-road racing here in the U.S. Most, if not all manufacturers have dedicated chassis to compete head to head in these conditions. This is the latest and greatest in […]
Proline Racing Pro-2 – 2wd Short Course Truck Review
About two months ago, we picked up a Pro-Line Racing Pro-2 2wd short course truck kit. You can read through the build at this link. The truck comes about 40% complete, and in no time we were ready to hit the track. I took it to the track a couple of times to get it […]
Associated RC10 B5 Rear Motor Team Kit Build Up
Team Associated has once again taken the r/c world by storm with their surprise release of the RC10B5 Rear Motor and RC10B5M Mid Motor 2wd Buggy kits. They were announced seemingly out of nowhere, with no team drivers competing with them at big events prior to the announcement of their release. I personally found this […]
RC Show´12 Results – Madrin, Spain
June 4th, 2012 
Kevin The First Edition of RC Show 2012 has taken place this weekend in Fuencarral Track in Spain. With a typical Spanish sunny weather, this Open International event has brought the Top national champions in this category and also from other countries. RC Show´12 has been a three day event, with controlled practice on Friday, qualify […]
New SCX10 Rear Shock Relocation Kit from Gear Head RC
June 4th, 2012 Kevin Gear Head RC is proud to announce a great way to add scale realism to your SCX10 rear suspension. Their new SCX10 Rear Shock Relocation Kit is made in the U.S.A. from 5052 aluminum and includes hardware and instructions. To view/purchase them, check out http://www.rpphobby.com/product_p/geasus003.htm
CowRC debuts new MONSTER SCREW CATCHER FLAT MAT
June 1st, 2012 Kevin We just got word from CowRC that they’ve released their new MONSTER Screw Catcher Flat Mat upon the world! Check out the full details below. X-Large scale R/C project maintenance and assembly made easy. Put an end to lost screws and parts today with our industry standard setting design! Partner with our Micro, Mini, & […]
AVID Titanium Shock Pins for RC8.2, RC8.2e & SC10 4×4
June 1st, 2012 Kevin AV1802 RC8.2 Titanium Shock Pins need no introduction. Racers everywhere will want to upgrade their 8.2 and SC10 4×4 vehicles with this light-weight and useful hop-up. Machined from billet 6Al-4V Titanium Center-drilled to locate calipers for precise shock length and droop measurements. Lose weight and add “bling” over the kit steel pins (6.4 g versus […]
XRAY XB9 Front Shock Tower Protector
June 1st, 2012 Kevin Front graphite shock tower protector made from hardened steel. Graphite shock tower protector Hardened Steel Ultra strong Laser-cut #352099 For more info hit up XRAY
RCSoup announces Media Partnership with EgyptSean Productions
May 30th, 2012 Kevin RCSoup is happy to announce that we’ve formed a limited media partnership with our friends over at EgyptSean Productions. For those of you that don’t know, EgyptSean Productions is a small production company specializing in R/C and promotional video capturing and editing. They operate a popular YouTube channel featuring a TON of cool R/C videos. […]
X Factory X–6 Squared WINS 3rd ROUND IN NETHERLANDS
May 29th, 2012 Kevin Privateer Wouter Wynen, driving an X Factory X – 6 Squared, won the third round of the BeNeLux Championship held over last weekend at MAC Vlijmen. Wynen TQed the event and won A-1, looking sure to take all the marbles. But in A-2, youngster Wesley Von Helmond came from 3rd on the grid to nip […]
Team Durango DNX408T is out now!
May 29th, 2012 Kevin Truggys don’t have to be ugly. In fact, they can be racy and beautiful. Team Durango wanted to design the best performing, best looking Truggy available. From any angle the DNX408T looks ready to win. It looks so good, it even looks fast when it’s standing still. With genuine Team Durango styling, the DNX408T brings […]
Thunder T6 Battery Charger Hands On
May 28th, 2012 Matt These days I’m running a lot of classes at the track every week. Personally, I’m running 2wd SCT, 4wd SCT, and 1/8th E Buggy. I also bring my two sons to the track, who are each running a 2wd SCT. My E Buggy uses 2-2cell Lipos, and each of the other trucks just use one […]
