MIPnews: MIP Spline CVD™ Center Drive Kit for Axial SCX10: Updated kits

MIP center drive shafts for the Axial line of vehicles are nothing short of legendary in the rock crawling community. But, for a while now the Axial SCX10™ drive shafts were in need of a face lift to incorporate the running changes that have occurred over at Axial including their outputs now featuring a hole for drive shaft attachment. MIP’s new SCX10™ Axles will no longer feature the double set screw design to clamp onto the through hole but now incorporate a pin set screw for attachment. Along with that improvement we have also changed the drive hubs so that there is no longer any interference when it comes to making contact with the stock spur gear cover! Last, but not least, the best feature of this kit is that it covers all SCX10™ models with a 12.3 wheel base; and yes this includes the ever popular Jeep Rubicon kit! Get yours today and put your trust in MIP drive shafts for your rock crawling needs!

mip axial

All Axial SCX10 Vehicles w/12.3″ Wheelbase

RC Rock Crawling Approved design
Reliable Pin set Screw attachment
Xtra Durable Construct
Dual MIP CVD™ articulation
40 degrees of angle
All Metal Design

Pin Set Screws
Spline Drive Technology
MIP CVD™ Construct
Heat Treated Steal Components
Grease/Loctite included
Compatibility with all SCX10™ Models
100% Made in the USA

HW-SHSS 8-32 x 1/8 Flat Point (4), MIP Confetti Sticker (2), MIP Thread Gel Safety Sheet (1), HW-PIN/ Ø3/32 x 5/8in Replacement Cross Pins (4), 1/4” x 3/8” Coupling (4), MIP Lube & Thread Gel Cup (1), MIP C-Drive Male Bone AX10 Scorpion (2), MIP CVD™ Spline Bone Female Axial AX10 (2), MIP 5mm Drive Hub Long Axial Wraith (1), MIP 5mm Drive Hub Std Axial Wraith (3), MIP Inst. Sheet Axial C-Drives (1), HW-SHSS, M3 x .099 Pin Screw (4)

1.5mm Allen Key – (Suggest – #9007 MIP Hex Driver Wrench 1.5mm)
2.0mm Allen Key – (Suggest – #9008 MIP Hex Driver Wrench 2.0mm)

SCX10™ Trail Honcho RTR – AX90022, SCX10™ Jeep Wrangler Unlimited Rubicon Kit and RTR – AX90027 & AX90028, SCX10 Jeep Wranger G6 Kit – AX90034 & AX90035, SCX10™ DeadBolt™ AX90044
(Does not fit the SCX10™ Dingo Kit -AX90021).

#1147 MIP CVD™ Rebuild Kit X-Duty and 1/8th MT MSRP: $12.95
#8110 MIP C-Drive Male Bone, AX10, Scorpion (1) MSRP:$12.30
#8111 MIP CVD™ Spline Bone, Female, Axial AX10 (1) MSRP: $15.00
#10142 HW-PIN/ Ø3/32 x 5/8in Replacement Cross Pins (4) for 1/8, X-Duty, Monster Truck Kits MSRP: $10.00
#11117 MIP 5mm Drive Hub, Long, Axial Wraith MSRP: $12.00
#11118 MIP 5mm Drive Hub, Std, Axial Wraith MSRP: $12.00
#99023 HW-Pin, 3/32 x 5/8 Solid Pin (4) MSRP: $7.00
#99031 HW-SHSS, 8-32 x 1/8 Flat Point (8) MSRP: $3.50
#99062 HW-SHSS, M3 x .099 Pin Screw (2) MSRP: $5.00

*Not Responsible for typographical errors



For reviews & more info visit http://miponline.com/store/mip13360.html

Both comments and pings are currently closed.

Comments are closed.

Powered by WordPress