Posts Tagged ‘SCT410’

Tekno RC LCG Lightened Motor Mount Insert for SCT410

The LCG Lightened Motor Mount Insert will lower the motor of your SCT410 by 5mm!  It is compatible with all Pro4 motors (any standard 36mm diameter motor).  Lowering one of the heaviest parts of the vehicle by 5mm will have a noticeable effect on handling, resulting in faster cornering and less mistakes due to traction […]

Tekno RC SCT410 4×4 Short Course Truck Review

As a die hard Team Associated guy deciding to run the Tekno SCT410 took some thought. Once I did some research on the truck and saw local and national race reports it was a no brainer. Pros and local racers were winning with it all over the country in box stock form. I had been […]

Tekno RC Releases New TiNi Shock Shafts for EB48.2, NB48, and SCT410

Tekno RC is pleased to announce new TiNi coated shock shafts for the EB48.2, NB48, and SCT410 line of vehicles.  The new front and rear shafts (TKR6004T and TKR6017T) feature the latest Titanium Nitride coating to ensure the smoothest operation in any condition.  It also provides improved strength and surface properties that allow the shaft […]

Tekno RC Super Light 1/8th buggy conversion for the SCT410

Tekno RC continues to push the 1/8th Electric Buggy boundaries.  Our SCT410 1/10th 4×4 SC truck is based on our EB48.  One of the things we tested during development of the SCT410 was a super lightweight (Super Lite) 1/8th buggy with the lighter weight SCT parts.  This resulted in a 1/8th electric buggy platform that […]

Tekno RC Rear Springs

Tekno RC is proud to announce their new rear spring options for the EB48/SCT410/NB48 line of vehicles.  These new springs are stiffer than the current offerings from Tekno RC.  The blue rear spring (TKR6055) is 1.4mm wire @ 8.5 turns and 80mm long.  The purple rear spring (TKR6056) is 1.4mm wire @ 8.0 turns and […]

Tekno RC +1.5 Degree Rear Hinge Pin Brace and additional hardware

Tekno RC is offering a new Rear Hinge Pin Brace with an additional 1.5 degrees of toe compared to the stock part.  The new brace is CNC machined from 7075 aluminum, then gun metal anodized for wear.  It is a direct fit on all Tekno RC 1/8th scale vehicles and will give you the option […]

Tekno SCT410 4×4 Short Course Build Up

Following the conclusion of the carpet indoor season at CRC Raceway in Rome, NY I started thinking of what classes I would run for the summer. I knew I would continue 2wd Short Course, but I needed another. I have always ran two. I toyed with returning to 1/8 nitro buggy after running it for […]

Tekno RC’s Chad Panek – Triple Podium Finish at 2013 Silver State Nitro Challenge

Tekno RC driver Chad Panek had a great time racing at the SIlver State Nitro Challenge this past weekend.    Running his SCT410, Chad was able to pull off a clean 2nd place in PRO4. Having gotten caught in a big pile up on the first lap, Chad was able to catch back up coming […]


San Diego RC Raceway played host to the Jimmy Babcock Racing League Round 2 this past weekend. A brand new track layout was put in and made the race an even playing field for all and Tekno RC made their presence known. In the 1/8 buggy class, the Tekno RC EB48 swept the podium and […]

New 17mm Hubs from Tekno RC

17mm Hub Adapter for SCT410 (1/8th buggy width) – The Tekno SCT410 has been a great success in the Tekno RC lineup. It has features that are unsurpassed by other cars on the market. Continuing to provide the driver with options for the SCT410, we are happy to introduce the new 17mm Hub Adapter Set […]

Powered by WordPress