Here is a race report from Team Serpent driver Billy Easton 2013 ROAR Nationals, Gulf Coast Raceway This years ROAR nationals was to be held in Porter ,TX. The facility was actually the same facility that held last years 200mm Nitro Touring car WC. The facility was top notch when it comes to what every […]
Solid Performance : ICharger 308 Duo Review
The iCharger, One of the most used chargers in today’s racing world. This charger has caused a lot of controversy in the Stock world as the high amp charging and high amp discharging has sparked a lot of issues in the racing community. The iCharger 308, 3010, and 4010 duo’s all run the same software, and […]
Tamiya M-05v2 Pro Mini JCW Coupe Build Up
Tamiya Mini (or M-Chassis) cars are something I have always admired through my years in the hobby. I’ve even owned a couple M-03’s but never really got into their full potential. That’s to say I’ve never raced one. The class has always appealed to me because the cars are smaller, typically more detailed, and unique […]
Team C TM2SC 2WD Mid Motor Short Course Hands On
In today’s race world the race participants dictate the quality of the race surface. The trend has moved to the farthest extreme of asphalt racing in off-road racing here in the U.S. Most, if not all manufacturers have dedicated chassis to compete head to head in these conditions. This is the latest and greatest in […]
Proline Racing Pro-2 – 2wd Short Course Truck Review
About two months ago, we picked up a Pro-Line Racing Pro-2 2wd short course truck kit. You can read through the build at this link. The truck comes about 40% complete, and in no time we were ready to hit the track. I took it to the track a couple of times to get it […]
Associated RC10 B5 Rear Motor Team Kit Build Up
Team Associated has once again taken the r/c world by storm with their surprise release of the RC10B5 Rear Motor and RC10B5M Mid Motor 2wd Buggy kits. They were announced seemingly out of nowhere, with no team drivers competing with them at big events prior to the announcement of their release. I personally found this […]
Serpent Aluminum CVDs
June 18th, 2013 
Matt New 1/8 CVDs for Serpent On Road cars For all Serpent 1/8 scale cars, 966 and 977, Serpent now offers the CVD drive shafts in hard anodized 7075-T6 aluminum . Laser engraved with length and Serpent logo. These are around 50% lighter than the same durable units in spring-steel. So an important reduction of rotational […]
RC Pro Series NE Round 1 @ CRC Raceway Coverage
June 18th, 2013 Kevin This past week (June 8-9, 2013) the RC Pro Series made it’s Northeast Division Round 1 stop at our local track, CRC Raceway in Rome, NY. This was the first of 2 Pro Series races CRC is hosting in 2013. What is the RC Pro Series? RC Pro is dedicated to promoting remote control vehicle racing […]
Front Bumper & Skid Plate for the Durango DESC410R, DESC410v2 & DESC410Rv2
June 17th, 2013 Kevin 73682 Front Bumper & Skid Plate for the Durango DESC410R, DESC410v2 & DESC410Rv2 The RPM Front Bumper and Skid Plate for the Durango DESC410R series of trucks adds a level of protection unmatched by any other bumper presently available. Our front bumper is wider than the stock bumper, protecting sections of the inner A-arms and […]
X FACTORY RELEASES X–6 CUBED BODY PHOTOS
June 15th, 2013 Kevin X Factory has released photos of the new X – 6 Cubed body. The X – 6 Cubed is an all carbon fiber slim design update on the X – 6 Squared. The new cab-forward body shows off the slim design but retains X Factory’s trademark swept-up rear for aerodynamic downforce. The cab is aggressively […]
Teaser: Serpent 1/8 Cobra Buggy Ready-to-Race with Novarossi power
June 15th, 2013 Kevin Serpent combines the best of two worlds: The Serpent ⅛ Cobra Buggy as a Ready-to-race machine, with the worlds most famous engine; Novarossi. This outstanding Ready-To-Race package is the most exclusive one in the market today, but still very affordable. Serpent is proud to have this unique cooperation with such a high profile company as […]
Associated Factory Team Centered ESC Mount
June 15th, 2013 Kevin The Factory Team Centered ESC mount allows racers to mount their ESC in the center of the car against the rear bulkhead. In addition, the Centered ESC Mount makes room underneath for the receiver when using shorter packs. These changes move more of the weight to the center, allowing the vehicle to change directions faster. […]
Tekno RC +1.5 Degree Rear Hinge Pin Brace and additional hardware
June 15th, 2013 Kevin Tekno RC is offering a new Rear Hinge Pin Brace with an additional 1.5 degrees of toe compared to the stock part. The new brace is CNC machined from 7075 aluminum, then gun metal anodized for wear. It is a direct fit on all Tekno RC 1/8th scale vehicles and will give you the option […]
DE Racing Setup System
June 14th, 2013 Matt DE Racing Setup System Introducing the new gold standard in accurate radio control car setup, the DE Racing Setup System. Basic features include a smooth flat surface for interface with measurement tools, several interchangeable adapters’ hubs to facilitate use with almost any model, and two wheel diameters that match those of tires, aiding in setting […]
RCSoup Store is OPEN!
June 14th, 2013 Kevin Well guys, we had a store up before and took it down because we didn’t have much to sell. We’ve turned that around though and have a few stellar items listed! T-Shirt Pre-Orders will run until June 30, 2013. After that the Limited Edition white logo shirt is going away. This is also a good […]
