Caster Racing EX1.5R Buggy – Build

The Pro Kit comes with CVDs for the center driveshafts as well. The front CVD is slightly shorter than the rear

We’ll put a “little bit” of Loctite on the grub screw, and attach the driveshafts to the front and rear diffs.

There are 4 screws that hold the center diff to the chassis. Make sure you put the driveshafts into the center diff before screwing it down

Here’s where we are. Starting to look like something now

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

Both comments and pings are currently closed.

3 Responses to “Caster Racing EX1.5R Buggy – Build”

  1. […] out our build article of the Caster Racing EX1.5R! Stay tuned for our initial review, and our long term review as we […]

  2. rick jenkins says:

    great wright up. Cars will be coming with clear bodies soon and also I’m hoping new captured cvd’s. FYI,also we just found out about the side guards not fitting correct and we have fixed problem

    Rick Jenkins
    Caster racing USA team manager

Powered by WordPress